Click here to return to INSTRUMENT SALES

INDICATED USE:  General purpose survey for normal and hazardous locations
APPROVED DETECTORS: Models 44-2, 44-6, 44-9 and 44-38
METER DIAL: 0 - 2 mR/hr, or 0 - 5k cpm, BAT TEST (others available )
MULTIPLIERS: X0.1, X1, X10, X100
RANGE:  Typically 0-200 mR/hr, or 0-500,000 counts/minute (cpm)
LINEARITY: Reading within 10% of true value with detector connected
SPECIAL CONNECTOR: Locking series "C" (39 inch cable only )
AUDIO: Built in unimorph speaker with ON/OFF switch (greater than 60 dB at 2 feet )
CALIBRATION CONTROLS: Accessible from front of instrument (protective cover provided )
HIGH VOLTAGE: Adjustable from 400 - 1000 volts
THRESHOLD: Fixed at 40 mV plus or minus 10 mV
RESPONSE: Toggle switch for FAST (4 seconds) or SLOW (22 seconds) from 10% to 90% of final reading
RESET: Push-button to zero meter
POWER: 2 each "D" cell batteries (housed in sealed compartment that is externally accessible )
BATTERY LIFE: Typically greater than 2000 hours with alkaline batteries (battery condition can be checked on meter )
METER: 2.5" (6.4 cm) arc, 1 mA analog type
CONSTRUCTION: Cast and drawn aluminum with beige powder-coat
TEMPERATURE RANGE: -4 degrees F(-20 degrees C) to 122 degrees F(50 degrees C) 
May be certified for operation from -40 degrees F(-40 degrees C) to 150 degrees F(65 degrees C)
SIZE: 6.5" (16.5 cm)H X 3.5" (8.9 cm)W X 8.5" (21.6 cm)L
WEIGHT: 3.5 lbs (1.6 kg) including batteries